How to Select a LED Driver?
A good LED driver should be the best that can drive a number of modules with an effortless ease. It is essential that you know how to use this driver to get the most from your system.
First thing that you need to do is to ensure that your LED's have not been damaged. If there are problems, you will be able to detect the problem with LED driver. For instance, a blown LED driver may lead to a reduction in output power and result in visible bluish glow.
The main role of the LED driver is to control the current by which the LEDs are driven and control voltage for LEDs. This function should be able to switch on and off all modules or array of LEDs in the system.
It is vital that you should know that the LED driver is also able to convert the different modes that you have set for the LEDs. These modes can be accessed by you. You just need to press the Control key. This will allow you to switch between the modes.
While dealing with the LED driver, you should know that there are several things that you need to take into consideration. This is a driver which has various modes and thus can help you in various scenarios. The driver is mainly responsible for the modulation of the active range of LEDs.
This mode is always measured in units of lumens per watt. In this case, you will notice that a certain LED is brighter than others at the same level of output. That is why, you need to ensure that your drivers are able to perform this function.
You need to be familiar with the basic requirements of your LED. These parameters will help you get a perfect LED driver. There are specific factors that will determine how to compare various drivers for each LED. Here are some of them.
One of the features that you need to pay attention to is the ability to handle a high voltage. There is also another feature called voltage-gradient function.
Comments
Post a Comment